Make-noise DPO Manual do Utilizador

DPO

MOD BUS and Timbre Shaping Sections:Mod BusThe internal Mod Bus SOURCE is hardwired for VCO A SINE wave, with the power to use any external source by

The phase reversal and Amplitude Modulation that occurs around the 50% range of the SHAPE parameter value is useful on it’s own (before FOLDing occurs

The OTHER WAVEFORM OUTPUTS In addition to the FINAL out there are several wave shapes that are all tapped or derived from the oscillator cores. Except

Patch Ideas:Animated Lead: Patch sequencer or keyboard CV to VCO B 1V/ Octave INput. Monitor VCO B FINAL OUT. Set SHAPE and ANGLE panel controls and C

2B3B4B61B1A2A3A4A5Calibrating the DPORequires small flat head screw driver or trimmer tool, tuned reference signal, oscilloscope. NOTE: if you plan to

2B3B4B61B1A2A3A4A57. To calibrate VCO A 1V/ Octave Scale, use VCO B (that is now tuned) as reference.8. Monitor VCO A and B SINEs. Patch or Midi to CV

4B6B1A4A6A2A3A1B2B 3BVCO SINE Shape and AmplitudeTrims for SINE shape (1A, 1B) and Amplitude (3A, 3B) are accessed through the top side of the module.

412 35 Calibrating the VCO B FINAL OUTTrims for FINAL OUT are SHAPE Balance (3) which is accessed through the top side of the module and FOLD Gain (4)

Limited WARRANTY:Make Noise warrants this product to be free of defects in materials or construction for a period of one year from the date of purchas

Installation:The Make Noise DPO is an electronic signal generator requiring 70mA of +/-12V of regulated power and properly formatted distribution rece

Overview:The DPO is a voltage controlled oscillator designed for generating complex waveforms and implementing FM synthesis within the analog domain.

1A 2A 3A 1B 2B 3B4B5B6B7B8B12B4A5A6A7A12A8A9A10A11A9B10B11BVCO A1A Triangle Waveform OUT: 10Vpp2A Sawtooth Waveform OUT: 9Vpp3A Sine Waveform

1273456VCO Interaction1. Beat Frequency LED: visual indication of Phase difference between VCOs A & B.2. FOLLOW CV INput: unipolar control input.

1A1B2A3A2B3B1C2C3C4C3D4D 5D2D1DVCO B Timbre Controls and MOD Bus1A. SHAPE Panel Control: unipolar control that determines the shape of the waveform fe

Complex Waveforms through Frequency Modulation and SYNC:On the DPO both VCOs are capable of generating complex and harmonically rich waveforms. This i

VCO B core behaviorThere is one way to affect the behavior of the VCO B core. The eXternal LOCK input allows for an extremely weak, phase reversed syn