Make-noise MATHS Manual do Utilizador descarregar pdf (Página 14)

Tips & Tricks

-Longer cycles will be achieved with more Logarithmic response curves. The fastest, sharpest functions will

be achieved with extreme exponential response curves.

-Adjustment to the response curve will affect RISE and FALL Times.

-To achieve longer or shorter RISE and FALL Times than available from Panel Controls, apply a voltage

offset to the Control Signal Inputs. Use CH. 2 or 3 for this offset voltage.

-Use the INV SUM OUT where you require reversed modulation but do not have means for inversion at the

CV destination (MIX CV IN on ECHOPHON for example).

-Feeding an inverted signal from MATHS back into the MATHS at any of the CV inputs is highly useful for

creating responses that are not covered by the Vari-Response control alone.

-When utilizing the SUM and OR outputs, set any unused CH. 2 or 3 to NOON or insert a dummy patch

cable to Signal Input of associated channel to avoid unwanted offsets.

-If it is desired that a signal processed or generated by CH. 1, 4 is both on the SUM, INV and OR busses

AND available as an independent output, utilize the Unity Signal OUT, as it is NOT normalized to the SUM

and OR Busses.

-OR output will not respond to or generate negative voltages.

-End of Rise and End of Cycle are useful for generating complex control voltage functions where CH. 1 and

CH. 4 will trigger from each other. Patch to each other’s Trigger, Signal, and CYCLE inputs.

1 2 ... 9 10 11 12 13 14 15 16 17 18

Sem comentários

Make-noise MATHS Manual do Utilizador Página 14